dust extraction arm supplier needs to pay attention to matters before overhaul


dust extraction arm supplier https://www.kaisenfilter.com/Suspended-Suction-Arm

.

The dust extraction arm supplier has the advantages of small volume processing, large air volume, compact structure and easy to use. dust removed from the dust extraction arm supplier can be discharged directly into the warehouse, i.e. fall directly onto the belt. The dust-containing gas enters the dust extraction arm supplier from the lower part of the dust collector. After being filtered by the filter bag, the clean air is discharged by the induced draft fan for a period of time, and the dust on the filter bag gradually increases, which causes the negative force of the filter bag to rise. It is necessary to clean the dust by the dust collector. The dust collector works normally.

For a dust extraction arm supplier, its application temperature depends on two factors, namely, the high acceptance temperature of the filter material and the gas temperature above the dew point temperature. The dust concentration at the inlet and outlet refers to the emission concentration of the dust collector, which is expressed in the same way as the dust concentration at the inlet. The dust concentration at the inlet and outlet shall be subject to the local request or the user's request. The emission concentration of the single pulse dust collector can generally reach below 50g/Nm³. The operating pressure of the single pulse dust collector is determined according to the static pressure value of the breezer installed before and after the dust collector and the position of the device, which is also the design of the dust extraction arm supplier. The pressure loss of a single pulse precipitator refers to the pressure drop of the gas from the precipitator to the inlet or outlet, or the resistance.

The performance of the dust extraction arm supplier depends not only on the correct selection of the filter bag material, but also on the dust cleaning system which plays a decisive role in the single pulse dust collector. The surface of the filter bag skeleton in contact with the filter bag should be smooth and smooth. Welding scars, bumps and burrs are not allowed. The daily operation of single-machine pulse dust collector is made of natural granite, which is machined into a circular curved plate, and the overall structure is smooth and flat. The boiler desulfurization dust collector should pay attention to the load change of the main equipment, which will affect the performance of the dust extraction arm supplier. The operation of single pulse precipitator can be divided into two kinds: test operation and daily operation. To prevent friction damage to the press cloth, moving dust should not be directly flushed into the press cloth. Single machine pulse dust collector can be used for dust collection in pneumatic conveying device, although the air volume is less and the dust and the box requirements are not afraid of pressure, so the cylindrical shape is more. All solder joints on the bag frame in the dust collector frame should be welded.

dust extraction arm supplier https://www.kaisenfilter.com/Suspended-Suction-Arm

Comments